Removing Lectures from a Computer Programming Class - A Quantitative Study

Removing Lectures from a Computer Programming Class - A Quantitative Study

C. Larsen, S. Gross, A. Bærentzen (2015).  Removing Lectures from a Computer Programming Class - A Quantitative Study. 10.

Computer programming is a discipline that is becoming increasingly important to today’s engineering practice and society overall, and it is used extensively and intensively in several fields. Examples can be found in mechanical, civil, or chemical engineering, and many other areas.

As such, it is common that higher education institutions teach at least one course on the topic in almost every engineering degree program in order to familiarize their students with basic programming concepts. This means that programming is taught to a variety of engineering students with significantly different backgrounds and expectations.

Consequently, it is important that all students - in particular those that had less prior exposure to computational methods and programming in their past – get sufficient time to build experience with their programming tools.

Lectures are often the standard teaching method of choice when designing a course structure. This also applies to programming classes. Two main reasons for this are the effectiveness of informing a large group of students in a very short time and the efficiency of doing so while involving only a single teacher.

However, we believe that programming is much better taught and learned by a ''hands-on'' approach. Therefore, we argue that lectures can be safely removed from programming courses in favor of extended exercise sessions where teaching assistants circulate and interact with the students individually when needed. This gives students additional time to build up experience with their entire programming environment consisting of the programming language, interface, and associated tools.

We support our argument by a discussion of both quantitative and qualitative metrics drawn from programming course evaluations. These were gathered in classes following our suggested model with distinctive variations such as block classes over a series of semesters. We conclude from the observed data that removing lectures from the course not only resulted in increased overall student satisfaction, but also bolstered the learning outcome.

Proceedings of the 11th International CDIO Conference, Chengdu, China, June 8-11 2015

Authors (New): 
Christian Thode Larsen
Sebastian Gross
J. Andreas Bærentzen
Pages: 
10
Affiliations: 
Technical University of Denmark, Denmark
Danish Research Center for Magnetic Resonance (DRCMR), Denmark
MathWorks GmbH, Germany
Keywords: 
Programming
MATLAB
Lectures
teaching
CDIO Standard 2
CDIO Standard 5
CDIO Standard 8
CDIO Standard 11
Year: 
2015
Reference: 
Attaway, S. (2013). MATLAB: A Practical Introduction to Programming and Problem Solving (3rd ed.). Butterworth-Heinemann.: 
Barr, V., & Stephenson, C. (2011). Bringing computational thinking to K-12: what is Involved and what is the role of the computer science education community? (ACM, Ed.) ACM Inroads, 2(1), 48- 54: 
Behrens, A., Atorf, L., & Aach, T. (2010). Teaching Practical Engineering for Freshman Students using the RWTH - Mindstorms NXT Toolbox for MATLAB. In E. P. Leite, MATLAB - Modelling, Programming and Simulations (pp. 41-65). SCIYO.: 
Bligh, D. A. (1971). What's the use of lectures? Hawfordshire, England: New Barnet: 
Crawley, E. F., Malmquist, J., Lucas, W. A., & Brodeur, D. R. (2011). The CDIO Syllabus v2.0 - An Updated Statement of Goals for Engineering Education. Proceedings of the 7th International CDIO Conference. Copenhagen.: 
Crawley, E. F., Malmquist, J., Östlund, S., & Brodeur, D. R. (2007). Rethinking Engineering Education: The CDIO Approach. New York: Springer Verlag.: 
ENAEE Administrative Council. (2008). Framework Standards for the Accreditation of Engineering Programmes. EUR-ACE.: 
Gross, S., Schlosser, J., & Schneider, D. (2014). Integrating Introduction to Engineering Lectures with a Robotics Lab. Proceedings of the 10 International CDIO Conference. Barcelona, Spain.: 
Knight, J. K., & Wood, W. B. (2005). Teaching More by Lecturing Less. (E. Chudler, Ed.) Cell Biology Education, 4(4), 298-310.: 
10.1187/05-06-0082
Lage, M. J., Platt, G. J., & Treglia, M. (2000). Inverting the Classroom: A Gateway to Creating an Inclusive Learning Environment. Journal of Economic Education, 30-43.: 
National Academy of Engineering. (2005). Educating the Engineer of 2020: Adapting Engineering Education to the New Century. Washington D.C: National Academies Press.: 
Thomsen, B. (2013, 3). Scenario Based Learning in Electronic and Electrical Engineering UCL. (T. a. Workshop, Ed.) Retrieved 11 11, 2013, from http://www.youtube.com/watch?v=sh6x8h-3eEE: 
Thomsen, B., Renaud, C., Savory, S., Romans, E., Mitrofanov, O., Rio, M. Mitchell, J. (2010). Introducing Scenario Based Learning - Experiences from an Undegraduate Electronic and Electrical Engineering course. Education Engineering (EDUCON) (pp. 953 – 958). Madrid, Spain: IEEE.: 
Wing, J. M. (2006). Computational Thinking. (ACM, Ed.) Communications of the ACM, 49(3), 33-35.: 
Wing, J. M. (2010). Computational Thinking - What and Why? Retrieved 10 22, 2013, from http://www.cs.cmu.edu/link/research-notebook-computational-thinking-what-and-why: 
Go to top